P C McKenzie Company

Industrial Boiler and Natural Gas Compressor Sales

  • About
  • Blog
  • Contact Us

CALL US TODAY - 877-244-4883

  • Compressors
    • IR Compressor Packages
      • IR 05H25NGSX
      • IR 05H25NGDX
      • IR 20H40NGSX
      • IR 20H40NGDX
    • IR Compressor Parts
    • IR Bare Blocks
    • Small CNG Station for Fleet Vehicle Refueling
    • CNG Rental Units
      • Sauer Natural Gas Compressor
    • Natural Gas Compressor Valve Rebuild Program
    • CNG Relief Valve Recertification
    • Troubleshooting Guide
  • BOILERS
    • Boiler Service and Boiler Repair
    • Patterson Kelley Condensing Boilers
    • Patterson Kelley Non Condensing Boilers
    • Unilux Water Tube Boilers
    • Cast Iron Boilers
    • Boiler Burner Parts
      • Industrial Combustion Lo-Nox Burners
      • Gordon Piatt Burner Parts
      • Weishaupt Burner Parts
    • Hurst Boilers and Hurst Boiler Parts
    • Atlas Boiler
    • Ajax Boiler Gaskets and Ajax Boiler Parts
    • Venting Solutions
      • Engine Generator Turbine Exhaust
      • Zero Chase Grease Duct
      • Boiler Domestic Water Heater Venting
    • Draft Induction Fan
  • AXELSON
    • Axelson Relief Valves
      • Axelson Relief Valve Maintenance
      • How Does an Axelson Safety Valve Work?
      • Garrett Safety Relief Valves
      • Axelson Orifice
      • How to Test Relief Valves – Axelson Test Stand for Pilot Valves
    • Axelson Spare Parts
    • Axelson ESP Pilot Sensor
    • Axelson ESPHL – High/Low Pressure Controller
    • Axelson Sand Probe Valve with Sensor
    • Axelson CRBBM Relay
    • Axelson Actuator Pneumatic Diaphragm Actuator
    • Axelson PRV Relay
    • Axelson Differential Pressure Sensing Unit
  • OIL CONTROL
    • Oil Level Regulator
    • Slow Flow Meter REN
    • Continuous Oil Change Module by Ren
    • Liquid Level Switch by Ren
    • Oil Supply Tanks
  • Boiler Parts
    • Boiler Pumps
    • Chemical Feed Pumps
    • Chemical Feed Tanks
    • Everlasting Blowdown Valve
    • Kewanee
      • Kewanee Boiler Parts
      • Kewanee Vortex Damper Rebuild
      • Kewanee Boiler Gaskets
      • Kewanee Burner
      • Cam Assembly
      • Kewanee Burner Blower Wheel
    • Pressure Reducing Regulators
    • Boiler Gaskets
    • Flame Controls
    • Weishaupt
    • Gauge and Site Glass
  • AMOT
    • Amot Thermostatic Control Valves
    • 3-Way Control Valves
    • Diaphragm Operated Gas Valve
    • Air Intake Shut Off Valve
    • Bearing Temperature Detector
    • High Temperature Valve
    • Overspeed Sensing Valve
    • Master Safety Control
    • Metal Particle Detector
    • Amot Temperature Sensor
    • Amot Electric Trip Lever Switch
    • Amot G Valve – 3 Way Temperature Control Valve
  • RESOURCES
    • CNG Safety – Is Compressed Natural Gas Safe?
    • CNG
    • CNG Storage Cascades
    • NGV Fast Fill Station
    • NGV School Bus Refueling
    • NGV Service Tips
    • NG Compressor Troubleshooting
    • Boiler Service Tips
      • Boiler Questions About Your Boiler
      • Boiler Glossary
      • Boiler FAQ
  • Solar Power

Amot Thermostatic Control Valves

Thermostatic Control Valves by Amot

We offer a wide range of Amot Controls thermostatic control valves. These control valves amot thermostatic control valvecan range in sizes from 1/2″ up to 16″ with a number of temperature settings and seals based upon the valve duty.

Amot thermostatic valves provide reliable, automatic control of fluid temperatures in turbines, compressors and engine jacket water and lubrication oil cooling systems or diverted depending on their temperatures.

They are suitable for process control and industrial applications where fluids must be mixed or diverted depending on their temperatures. They may also be applied to cogeneration systems to control temperatures in the heat recovery loop assuring proper engine cooling and maximizing heat recover.

All valves are equipped with positive 3-way valve action in which the water or lubricating oil is positively made to flow in the direction required.

Amot thermostatic valves are available in pipe sizes from 1/2″ to 8″ for water flow rates of 2-2800 USGPM.

Thermostatic Valves display excellent  reliability even under extreme shocks or vibration.

FEATURES

  • Tamper-proof temperature setting
  • No fragile external bulbs or tubing
  • Completely self-contained
  • Positive 3-way valve action
  • Holds close regulation
  • Not sensitive to pressure
  • Simple, rugged construction
  • Operates in any position
  • Compact Size
  • Large Capacity with light weight
  • Excellent reliability under extreme shocks and vibration
  • Practically no maintenance is ever required
MODEL B (more info >>)
thermostatic B Valve
-1/2″ to 2″ threaded connections
1-1/2″ to 8″ flanged connections
Flow Rates of 68 to 1750 gpm
Cast Iron, ductile iron, bronze, steel, stainless steel
Setting available from 55° to 240°F
MODEL C (more info >>)
amot-valve-c1-1/2″ to 2″ threaded connections
1-1/2″ flanged connections
Flow Rates of 9 to 54 gpm
Cast Iron, bronze, aluminum, steel, stainless steel
Setting available from 65° to 230°F
MODEL D (more info >>)
amot-valve-d8″ flanged connections only
Flow Rates of 1500 to 2800 gpm
Cast Iron, ductile iron, bronze, steel housings
Setting available from 50° to 230°F
MODEL E (more info >>)
amot-valve-e1-1/4″ to 1-1/2″ threaded or flanged connections
Flow Rates of 40 to 75 gpm
Cast Iron, steel, stainless steel housings
Setting available from 85° to 237°F
MODEL H (more info >>)
amot-valve-h4″, 5″ and 6″ flanged connections
Flow Rates of 345 to 1350 gpm
Steel or stainless steel housings
Setting available from 55° to 240°F
MODEL J (more info >>)
amot-valve-j1/2″, and3/4″ threaded connections
Flow Rates of 2 to 20 gpm
Aluminum or bronze housing
Setting available from 65° to 235°F

MINIMAL MAINTENANCE UPON INSPECTION
If the valves are properly applied and installed correctly, they should require minimal maintenance. However, AMOT does suggest an inspection of the valves every two to three years.

WHAT TO REPLACE DURING INSPECTION?
During this inspection period it is advisable to replace the elements, the o-rings and gasket where appropriate. Parts replacement recommendations can be found on the AMOT literature for your particular valve. This will also include detailed instructions on how to tear the valve down and replace the elements. If you do not have the documentation that came with your valve, call us and we we will help.

SERVICE KITS
Contact our parts department with the Amot valve model number and serial number. We will help you identify the appropriate service kits required for your control valve.

How Does an Amot Thermostatic Control Valve Work?
The heart and soul of the AMOT thermostatic control valve can be found in the temperature element sitting inside the valve body. Located at the base of the temperature element is special wax material that expands and contracts in response to temperature changes. This special material remains in a semi-solid state and is very sensitive to temperature changes. It is this expansion and contraction that provides the motive force necessary to operate the valve.

When the thermostatic material expands, due to an increase in temperature, it pushes against a rubber plug that in turn forces the piston through a reduced piston guide. This action multiplies the movement of the piston to create a substantial actuation force.

The temperature element is attached to a sliding valve that will direct water (or lube oil) out the bypass port or through the outlet port depending upon the temperature of the fluid.

The AMOT elements also include a return spring that re-seats the element in the valve. AMOT thermostatic valves are not affected by changes in pressure or by pressure surges.

TROUBLESHOOTING GUIDE
Check out our IR CNG troubleshooting guide. This tool allows you to identify some common Ingersoll Rand compressor problems, pin-point possible causes and then offers a recommended course of action
View the guide >>

Are Natural Gas Powered Vehicles safe?
Natural Gas an ideal fuel source for many reasons, including safety. Natural Gas is lighter than air. This means that it will not puddle (like gasoline) or sink to the ground like propane, which is heavier than air. Instead, Natural Gas will rise and dissipate in the atmosphere. Natural gas also has a higher ignition temperature. This means that it is much harder to ignite. Also the storage systems used for compressed natural gas are infinitely stronger that the gasoline tanks found on cars and trucks today.
Learn more >>

CONTACT US

Toll Free: 1-877-244-4883
Fax: 412-257-8890
Phone: 412-257-8866

SHIPPING ADDRESS
P.C. McKenzie Company
1365 McLaughlin Run Road
Pittsburgh, PA 15241

MAILING ADDRESS
P.C. McKenzie Company
P.O. Box 112638
Pittsburgh, PA 15241

- P.C. McKenzie Company is located South of Pittsburgh, Pennsylvania -


Julie Good is a Pittsburgh based photographer. Please visit her site to view her gallery.

>> JG Photography >>

© Copyright 2023 PC McKenzie · All Rights Reserved ·