Amot High Temperature Valve
Model 4075/4475 high temperature valve is used for sensing high pressure natural gas compressor discharge temperature. When a valve is positioned at each compressor cylinder discharge manifold, an increase in temperature past the valve set point will cause the valve to vent off a control signal.
An excellent choice for sensing gas or liquid high temperature conditions, the field adjustable temperature setting from 130°F to 500°F provides wide setpoint flexibility. The standard thermowell provides extended life to the sensor and simplifies calibration and maintenance.
2-way normally-closed (on low temperature), balanced spool valve which will vent on an increase in temperature beyond the setpoint, causing the compressor to shut down when used with an AMOT Safety Control System.
Viton O-ring seals are standard for high temperature resistance. The valve body is made of anodized aluminum or 316 S.S.
Quick and easy removal with the Stainless Steel well furnished as part of the standard valve assembly is held into the well by straight thread connections and a locking nut. Unscrewing the valve body/locknut and disconnecting the tubing fittings is all that is required to remove the valve from the well.
Rugged, reliable actuator – bi-metallic temperature sensing discs arranged in a stack deflect uniformly as the temperature increased providing a long life, low maintenance actuator for the valve spool.
When the temperature of the fluid flowing past the well is below the tripping point, the temperature sensing element assembly is contracted and the loading spring keeps the valve spool in the closed position. If the fluid temperature increases, the bi-metallic element assembly expands, moving the valve spool downward (opening valve) against the springs and opening the IN to the VENT port.
Adjustable Trip Temp. Range…….. 130°-500°F (54°-260°C)
Maximum Allowable Temp. (Proof)………….. 500°F (260°C)
Maximum Pressure at IN Port ………. 125 psi (860 kP)
4075 ………… Anodized Aluminum
4475 ………… 316 Stainless Steel
Standard Seals …………. Viton
Net Weight ……………….. 2 lbs. (0.0 kg)
- 316 Stainless Steel or Cast Aluminum Construction
- Reliable Protection
- Few Moving Parts
- Easy Maintenance
- Thermowell Included
- Viton Seals
- Field Adjustable from 130 F to 500 Degrees F
- Compressor Discharge Temperature
- Jacket Water Temperature
- Lube Oil Temperature
- Steam Temperature
- Process Temperature