Continuously Change Oil on a Running Engine –
The Continuous Oil Change Module is used with the Ren Oil Level Regulator to continuously change oil on a running engine. Maintaining constant oil quality regardless of engine running time leads to longer life and extended time between overhauls.
For engines that must run without interruption, continuous oil change greatly reduces and simplifies maintenance. The used oil can be routed to a waste tank or into the fuel for burning on approved applications.
[color-box]A typical oil change rate is equal to the crankcase capacity divided by the recommended change interval. [/color-box]Preinstallation Notes:
- The Oil Change Module is an oil removal product only, a separate device, like the REN OIL REGULATOR, must be installed to replenish the oil in the crankcase.
- The Oil Change Module is designed for stationary applications only.
- Route pipes and cables away from heat sources and moving components.
FEATURES
■ Calibrated in gallons, quarts and liters
■ Compact size and rugged construction
■ Electrical circuit protected against voltage spikes, reverse supply voltage and noise
■ Remote readouts available as options
■ Adjustable up to 0.99 gallon/quart/liter per hour with oil pressures of 40 psi(275.8 kPa) and above
■ Maintains constant oil quality leading to longer engine life
■ Extended oil change intervals
■ Remote mount option tracking provides continuous access to engine data
Can be used in conjunction with the REN Oil Level Regulator.
ORDERING INFO
| PART # | VOLTAGE | UNITS |
| RN24000 | 12V DC | Gallons |
| RN24001 | 24V DC | Gallons |
| RN24002 | 12V DC | Litres |
| RN24003 | 24V DC | Litres |
| RN24004 | 12V DC | Quarts |
| RN24005 | 24V DC | Quarts |
SPECIFICATIONS
FUEL OIL CONNECTIONS: (Inlet) 1/4″ – 18 NPTF
FUEL OIL CONNECTIONS: (Outlet) 1/4″ – 18 NPTF
MIN OIL PRESSURE: 30 PSI (206.8 kPa)
MAX OIL PRESSURE: 100 PSI (689.47 kPa)
WEIGHT – 5.2 lbs.
Power – 12 VDC or 24 VDC
Min Oil Pressure – 30 PSI
Max Oil Pressure – 100 PSI
INSTALLATION INSTRUCTIONS
Continuous oil change module installation instructions
