MODEL C THERMOSTATIC VALVE

Amot Model C Valves are available in a wide selection of sizes and settings to fill a multitude of fluid temperature control requirements.

They utilize the proven expanding wax principle to actuate a 3-way temperature element assembly. Sturdy housings of cart iron, aluminum, bronze or steel fit almost any applications or pressure rating.

Because some fluids such as synthetic lubrications are not compatible with copper or brass, assemblies are available with nickel plating.

Amot Model C Thermostatic Valves

The available Model CM, CL, CF and CCM valves may be used for diverting or mixing service. They are ideal for blending two streams of differing temperatures to a desired temperature.

They make very economical temperature limiting valves to prevent scalding in home, motel or hotel hot water supply systems.  Radiant heating systems can use these valves in limiting water temperature to prevent surface cracking and over-heating of plastic piping. Other applications include electronic and battery cooling circuits, pump temperature relief valves, etc.

FEATURES

• Flow rates of 6-54 GPM
• Tamper-proof temperature settings of 65 – 235 degrees F
• Completely self-contained
• Positive 3-way valve action
• Combinations Available: Steel, Bronze, Cast Iron and Aluminum Housing
• 1/2″ to 1-1/2″ Pipe sizes, Threaded & Flanged Connections

APPLICATIONS

• Engine & Compressor cooling system
• Lube Oil Systems
• Cogeneration Heat Recovery Loops
• Process Control
• Temperature mixing or diverting

1-1/2″ to 2″ threaded connections
1-1/2″ flanged connections
Flow Rates of 9 to 54 gpm
Cast Iron, bronze, aluminum, steel, stainless steel
Setting available from 65^o to 230^oF

 

HOW TO ORDER THE AMOT C VALVE – DOWNLOAD PDF

 

STANDARD THERMOSTATIC VALVE ELEMENTS FOR MODEL C
1125X095 – ELEMENT
1125X100 – ELEMENT
1125X110 – ELEMENT
1125X120 – ELEMENT
1125X130 – ELEMENT
1125X140 – ELEMENT
1125X150 – ELEMENT
1125X160 – ELEMENT

---

[table id=2 /] [table id=3 /] [table id=4 /] [table id=5 /]