Engine Generator Exhaust - Chimney and Exhaust Systems - Venting
The Model P4 is a double wall prefabricated exhaust system with 4" insulation for use in venting appliances that require a
positive, neutral or negative draft exhaust system.
Sections
are provided in lightweight, easy-to-handle lengths.
Connections are sealed with pressure tight drawbands and high
temperature sealant. Straight sections, expansion joints,
tees, elbows and support devices are offered, allowing a complete
system to be assembled from standard components.
The Model P4 has endured rigorous tests by the Underwriters
Laboratories.
A Proven Reliable Product
SYSTEM
CONCEPT:
The Model P4 is a modular double wall prefabricated exhaust
system with 4" insulation for use in venting appliances that
require a positive, neutral or negative draft exhaust system.
Sections are provided in lightweight, easy-to-handle lengths.
Connections are sealed with pressure tight drawbands and high
temperature sealant. Straight sections, expansion joints,
tees, elbows and support devices are offered, allowing a complete
exhaust system to be assembled from standard components.
UNIQUE FEATURES:
THE MODEL P4 OFFERS UNIQUE FEATURES THAT NO OTHER CHIMNEY
MANUFACTURER CAN PROVIDE.
All liners and shells are continuously seam welded.
Spot welds are not used on any of the seams. This assures
a leak proof joint and maximum strength. This also
minimizes corrosion, adding longevity to the stack.
The pipe section utilize a stiffening bead on the liners.
This bead maintains concentricity of the pipe and prevents the
insulation from settling in shipment and in operation.
This System does not use captive nuts and
bolts. A system that uses these types of bolts can be very
difficult to align and get a nut started on a bolt.
Boiler Adapters include a seal ring to cover the gap
between the liner and shell. The seal ring will provide a
neat and completed appearance as well as preventing rodents from
entering the area between the shells and possibly causing damage
to the insulation.
COMPETE
LINE OF FITTINGS AND SIZES AVAILABLE:
The Model P4 Chimney System is available in even and odd
diameters ranging from 5" to 48". A complete line of
Straight Sections, Expansion Joints, Tee's, Elbows, Rain Caps, Roof
Penetration components and support members are offered. In addition
to the standard components virtually any conceivable fitting is
available as a special order item.
MATERIAL THICKNESS:
The standard material thickness for liners is 20 ga.
(.035"); for shells it is 22 ga. (0.34") Fittings larger
than 24" diameter utilize 18 ga. (.048) on the shell.
Pipe diameter larger than 36" utilize 18 ga. on the liners and
the shells.
SYSTEM COMPONENTS:
Adapter Kit (Flanged)
Adapter Kit (Raw)
Straight Section
Adjustable Length
90o Boot Tee
90o WYE
End Cap
Drain Tee Cap
90o Elbow
45o Elbow
30o Elbow
Drain Section
Horizontal Drain
Nozzle Section
Base Drain Section
Flashing
Rain Collar
Insulated Thimble
Rain Cap
Horizontal Termination
Support Plate
Wall Support
Guy Section
Variable Length Section
Bellows Section
Tapered Increaser
Top Section
Exit Cone
Flip Top Cap
Fan Adapter
90o Tee
Reducing 90o Tee
45o Lateral Tee
Reducing 45o Lateral Tee
Full Ring
Half Ring
Floor/Roof Guide
Wall Guide
Square-To-Round Transitions
Pressure Relief Valve
Custom Dimensions are available to suit your needs in even and
odd sizes.
Schebler MODEL P2 CHIMNEY AND EXHAUST ... another quality product.
MAILING:
PHONE:
SHIPPING:
P.C. McKenzie Company P.O. Box 112638 Pittsburgh, PA 15241
