PEERLESS BOILER – CAST IRON BOILERS
Cast iron is the most durable heat exchange material available on the market with a history of decades of boiler life.
Peerless sectional cast iron boilers are applied to hot water and low pressure steam systems ranging from 600,000 BTU input to 4,500,000 BTU input..
The cast iron units are available in forced draft and atmospheric burner configurations.
Series LC/LCE™ Large Commercial Cast Iron Boiler
Standard Equipment
- Manual Reset High Limit Control
- Honeywell Operating Control
- LWCO on Packaged Boilers
- Safety Relief Valve (30 psi – Water; 15 psi – Steam)
- Combination Temperature-Pressure Gauge (Water)
- Operating Pressuretrol (Steam)
- Gauge Glass with Fittings (Steam)
Series LC/LCE™ Boiler Features
- Oil, Gas or Combination Gas/Oil-Fired Boilers for Hot Water or Steam Systems
- 22 sizes, 4 – 24 sections; Available as Knockdown, Factory Assembled Sections or Factory Packaged
- Up to 84.2% Combustion Efficiency—Boiler Efficiencies Compliant with Federal and ASHRAE 90.1 Requirements
- Forced Draft Venting—Requires Only a Three Foot Vent Above the Roof
- Advanced Boiler Design that Includes Integral Cast Iron Flue Collector, Unique Flex-Seal Gaskets and Individual Draw Rods
- Cast Iron Rear Outlet with Integral Damper (LC™)—can be Adjusted and Locked in Position
- Cast Iron Top Outlet with Butterfly Flue Damper (LCE™)—can be Mounted Horizontally or Vertically
- Optional Tankless Domestic Hot Water Coils Available for all Models
>> DOWNLOAD SPECIFICATIONS HERE<<<
Series 211A™ Large Commercial Steam Boilers
Standard Equipment
- Manual Reset High Limit Control
- Honeywell Operating Controls
- Injection Molded Flex-Seal Flow Port Gaskets
- Factory Assembled Gas Train to Meet ANSI Z21.13
- Individual Draw Rods for Ease of Assembly
- Float and Probe Type LWCO
- Gauge Glass and Fittings
- Pressure Gauge
- 15 PSI Safety Valve
Series 211A™ Boiler Features
- Atmospheric Gas Fired, Commercial Cast Iron Boiler
- Natural or LP Gas
- 43 sizes, 4 – 46 sections; Available as Knockdown, Factory Assembled Sections or Factory Packaged
- Boiler Efficiencies Compliant with Federal and ASHRAE 90.1 Requirements
- Factory Assembled Gas Train to Meet ANSI Z21.13
- Natural Draft (Chimney) Venting
- Large Water Content
- Built-in Horizontal to Vertical Draft Hood Provides Low Profile Design—Ideal for Installations with Low Ceilings
- Exclusive Access Design—Accessibility to Flueways from Both Ends for Inspection and Cleaning without Removing Entire Jacket
>> DOWNLOAD SPECIFICATIONS HERE <<
Series 63/64™ Residential/Semi-Commercial Gas Boilers
Series 63/64™ Boiler Features
- Gas-fired, Cast Iron Boilers for Natural or LP Gas
- Packaged or Knockdown, Hot Water or Steam Boilers
- 13 Sizes, 3–12 Sections; Residential and Commercial
- Natural Draft (Chimney) Venting
- Up to 83.5% AFUE*
- Spark Ignition
- Large Water Content—Ideal for Steam and Large Volume Hot Water Applications
- Skim Tapping for Cleaning Steam Boilers
- Steel Push Nipples
- Slide-in, Preassembled Burner Tray
- Low Profile Design
*for residential models
Standard Equipment
> Cast Iron Sections—Factory Tested & Assembled (3-6 sections) or Split-Assembled (7-12 sections)
> Boiler Reset Control with Low Water Cut-off for Increased Efficiency and Safety
> Pre-assembled Wiring Harness
> Deluxe Insulated Enameled Steel Jacket—Reduces Boiler Heat Loss
> Blocked Vent Shutoff Switch
> Flame Roll-Out Shutoff Switch
> Drain Valve
>> DOWNLOAD SPECIFICATIONS HERE <<
