In order to provide safe burner operation a set of controls are utilized to monitor and operated the burner. These Flame Safeguard controls provide:
- A safe way of starting and stopping the burner. This may be done manually or automatically.
- A pre-determined sequence for starting and stopping the burner
- Supervision of the flame while operational
- A guard against over pressurization or over temperature conditions
- A means of regulating the firing rate
- Maintains boiler readiness
In short, the Flame Safeguard Control provides the intelligence for safe and efficient boiler/burner operation.
The Honeywell 7800 SERIES State of the art flame safeguard control provides safety, all-inclusive diagnostics, communication & networking capabilities into one reliable microcomputer burner control.
Following is a listing of the various options available for the 7800. Please call our parts department with any questions. – 877-244-4883.
[su_table]
| PART # | DETAILS |
|---|---|
| EC7810A,EC7820A | Integrated Burner Controller |
| EC7823A | Primary Flame Switch |
| EC7830,EC7850 | Integrated Burner Controller ( Relay Modules ) |
| EC7885A | EC7885A; RM7885 Semi-Automatic Primary Control. |
| EC7890A,B | EC7890A; RM7890 A, B, C Primary Control. |
| EC7895A,C | EC7890A; RM7895 A, B, C, D Full Function Primary Control. |
| RM7800E,G,L,M | RM7800 Programmers |
| RM7823A | Primary Flame Switch |
| RM7824A | Primary Control |
| RM7838A | Semi-Automatic Industrial Primary Control |
| RM7838B | Semi-Automatic Industrial Primary Control |
| RM7840E,G,L,M | RM7840 Programmer |
| RM7885A | Semi-Automatic Primary Control |
| RM7888A | Semi-Automatic Industrial Primary Control |
| RM7890A,B,C | Primary Controls |
| RM7890D | Primary Controls |
| RM7895A,B,C,D | Full Function Primary Control |
| RM7895E,F | Full Function Primary Control |
| R7847 | Flame Signal Amplifiers |
| R7848 | Flame Signal Amplifiers |
| R7849 | Flame Signal Amplifiers |
| R7886 | Flame Signal Amplifiers |
| R7B47, R7846 | Flame Detection Systems |
| R7649,R7886 | Flame Detection Systems |
| Q7800A,B | 22-Terminal Universal Wiring Sub-bases |
| Q7700A,B | Network Interface Unit |
| QS7800A/QS7850A | Communications Interface Control Bus Module |
| ST7800A | Plug-In Purge Timer Card |
| S7810A | Data Control Bus Module TM |
| S7800A | Keyboard Display Module |
| S7810B | Multi-Drop Switch Module |
| S7820A | Remote Reset Module |
| S7830A | First Out Expanded Annunciator |
| ZM7850A | Combustion System Manager TM Software |
| A7800A | Tester |
[/su_table]
